The Avinox M2 and Avinox M2S sit at the top of DJI’s second-generation e-bike drive lineup, and telling them apart on paper takes more than checking peak torque. On international spec sheets, the M2 delivers 125 Nm and 1,100 watts while the M2S jumps to 150 Nm and up to 1,500 watts. Oddly enough, the stronger M2S unit is slightly lighter at 2.59 kg versus 2.65 kg for the M2.
For American buyers, two hidden caveats change how you should spend your money. First, the M2S only hits its headline 1,500-watt ceiling when paired with specific high-discharge batteries; on standard packs, it drops to 1,300 watts. Second, US-market bikes ship with firmware capping peak output at 750 watts and 20 mph to meet federal rules. That shifts the real comparison from raw horsepower to torque delivery, heat management, and frame build tiers.
With the Amflow UE Carbon commuter launch bringing the M2 to city streets alongside trail machines from Amflow and Forbidden, riders are seeing both motors on the same frame platforms. Here is how the internal hardware, battery limits, charging speeds, and 2026 bike builds compare.
Avinox M2 Drive Unit: 125 Nm Torque and Helical Gearing

The Avinox M2 is the mid-tier workhorse of the second-generation Avinox platform, replacing the original 105 Nm M1 motor on most new 2026 releases. Weighing roughly 2.65 kg (5.8 lb), it shares the same compact 173 × 101 × 103 mm housing footprint as the M2S while packing different internals.
Inside the casing, the M2 uses helical gears and round copper wire windings. Regular assist modes top out at 110 Nm of torque, while Boost mode pushes up to 125 Nm (tuned to 120 Nm on builds like the Forbidden Druid E). Global maximum output sits at a steady 1,100 watts regardless of which Avinox battery sits in the downtube. It delivers up to an 800 percent assist ratio and an operating noise rating around 45 dBA.
I’d look at the M2 as the practical sweet spot for almost every rider outside extreme technical enduro climbing. At 110 to 125 Nm, it already outperforms traditional 85 Nm to 90 Nm mid-drives from Bosch and Shimano on paper. Consistent 83 percent peak efficiency also keeps battery drain predictable on long commutes or backcountry loops. You can see how mid-drives manage torque sensors versus hub motors in our primer on how electric bikes work.
Avinox M2S Drive Unit: 150 Nm Boost Torque and Battery Dependencies

The Avinox M2S is the flagship motor built for steep vertical climbs and riders chasing maximum power-to-weight density. Even with higher thermal demands, DJI shaved mass to roughly 2.59 kg (5.7 lb) while raising maximum efficiency to 84.5 percent.
Two internal upgrades enable that jump. The M2S swaps round windings for flat copper wire windings that pack tighter and shed heat faster during sustained climbs. It also introduces a dual-meshing anti-backlash gear design to handle 130 Nm of continuous torque and up to 150 Nm in 60-second Boost mode bursts.
Here is the battery catch that trip-wires many shoppers. On Avinox’s drive unit specs, the M2S needs the high-discharge Avinox FP700 (700 Wh) integrated battery or RS800 (800 Wh) removable battery to deliver its 1,500-watt global peak output. When paired with standard FS600 or FS800 packs, global peak wattage drops to 1,300 watts while torque stays at 130 Nm to 150 Nm. Third-party frame batteries like the 600 Wh and 800 Wh packs on Forbidden’s Druid E see that same 1,300-watt global ceiling.
| Motor Specification | Avinox M2 | Avinox M2S |
|---|---|---|
| Motor Weight | Approx. 2.65 kg (5.8 lb) | Approx. 2.59 kg (5.7 lb) |
| Continuous Torque | 110 Nm | 130 Nm |
| Boost Mode Torque | 125 Nm (120 Nm on some OEMs) | 150 Nm (up to 60 seconds) |
| Global Peak Power | 1,100W (all batteries) | 1,500W (FP700/RS800) / 1,300W (FS packs) |
| US Market Firmware Cap | 250W rated / 750W peak, 20 mph | 250W rated / 750W peak, 20 mph |
| Gearing & Windings | Helical gears, round copper wire | Dual-meshing anti-backlash gears, flat wire |
| Max Efficiency | 83% | 84.5% |
Amflow UE Carbon and TL Carbon: Urban and SUV Bikes Using the M2

Amflow places the Avinox M2 squarely in its utility, commuter, and all-terrain SUV lineup rather than saving it solely for mountain bikes. Both the newly launched Amflow UE Carbon ($3,499) and UE Carbon Pro ($3,899) run the M2 paired with a removable 600 Wh RS600 battery. That pairing brings steep-hill acceleration to a 56-pound equipped step-through commuter.
At the same $3,899 price as the UE Carbon Pro, the Amflow TL Carbon steps up to a full-suspension SUV frame with 800 Wh of removable capacity and a 440-pound total weight rating. Both the UE and TL include Amflow’s standard 168W charger in the box and software-driven features like traction control and automatic electronic shifting.
I’d pick the M2-equipped UE or TL over heavier mid-drive commuters if your route climbs steep neighborhood grades or hauls loaded panniers. Neither model needs 150 Nm on paved streets. The 125 Nm Boost reserve is already plenty for stopping and starting on hills with 60 pounds of groceries on the rear rack.
Amflow PR Carbon and PX Carbon: Enduros Splitting M2 and M2S

In Amflow’s dedicated electric mountain bike catalog, the M2 and M2S separate entry-level trail builds from flagship enduro machines. The Amflow PR Carbon ($4,999 USD) relies on the Avinox M2 motor with an 800 Wh removable battery, keeping its price well below flagship carbon trail bikes.
Stepping up to the Amflow PR Carbon Pro ($6,799 USD) swaps the motor to the Avinox M2S while keeping the 800 Wh removable battery and mixed-wheel 29″/27.5″ enduro frame. At the top of the range, the Amflow PX Carbon ($7,999 USD) and PX Carbon Pro ($10,199 USD) run the M2S exclusively inside a 2.4 kg carbon frame with an integrated 700 Wh FP700 battery. That lighter frame drops total PX weight down to roughly 20.6 to 21.5 kg (45.4 to 47.4 lb). Meanwhile, the older Amflow PL Carbon ($7,499) continues using the first-generation 105 Nm M1 drive unit.
Forbidden Druid E: Tiered M2 and M2S Builds on One Trail Frame

Amflow isn’t the only brand splitting builds between the two motors. Canadian high-pivot specialist Forbidden uses both units across its four-tier Druid E full-carbon trail lineup, giving buyers a clear look at how much bike makers charge for the M2S upgrade.
Forbidden installs the Avinox M2S (130 Nm continuous, 1,300W global peak) on its flagship Tier 1 ($12,699 with 600 Wh or $12,999 with 800 Wh) and Tier 2 ($10,299 or $10,599) builds. Tier 3 ($8,599 or $8,899) and Tier 4 ($7,499 or $7,799) share the identical 150 mm rear / 160 mm front carbon frame but spec the Avinox M2 (110 Nm continuous, 120 Nm Boost, 1,100W global peak).
Other boutique and European mountain bike brands have also announced Avinox-powered models for 2026, including Unno (Mith), Megamo (Reason), Commencal (Meta Power SX Avinox), Crestline (RS 181), Teewing, and Velduro. If you are shopping in the United States, Amflow and Forbidden currently offer the clearest published US MSRP tiers and dealer availability.
| E-Bike Model | Motor | Battery Options | US MSRP |
|---|---|---|---|
| Amflow UE Carbon / Pro | Avinox M2 | 600 Wh RS600 (Removable) | $3,499 / $3,899 |
| Amflow TL Carbon | Avinox M2 | 800 Wh RS800 (Removable) | $3,899 |
| Amflow PR Carbon | Avinox M2 | 800 Wh (Removable) | $4,999 |
| Amflow PR Carbon Pro | Avinox M2S | 800 Wh (Removable) | $6,799 |
| Amflow PX Carbon / Pro | Avinox M2S | 700 Wh FP700 (Integrated) | $7,999 / $10,199 |
| Forbidden Druid E (T3 / T4) | Avinox M2 | 600 Wh or 800 Wh (Integrated) | $7,499–$8,899 |
| Forbidden Druid E (T1 / T2) | Avinox M2S | 600 Wh or 800 Wh (Integrated) | $10,299–$12,999 |
US 750W Limits, Fast Charging, and Which Motor Fits Your Riding

Before paying extra for an M2S build in the United States, check how federal trail and street rules shape what you feel at the pedals. On US-spec Amflow bikes running firmware V01.03.01.10, both the M2 and M2S restrict peak power to 750 watts and assistance speed to 20 mph. That keeps them compliant as Class 1 e-bikes on eligible public lands and BLM singletrack.
That doesn’t make the M2S pointless. Even under a 750-watt US ceiling, the M2S retains higher torque capacity for slow, steep technical pitches where cadence drops below 60 rpm. Its flat copper windings also resist thermal throttling better on multi-thousand-foot climbs. Just keep in mind that jumping from an M2 bike to an M2S bike in Amflow or Forbidden lineups also bundles pricier suspension and drivetrain tiers, adding $1,800 to $2,500 to the bill.
Charger hardware often matters more in daily use than the 25 Nm gap between motors. Most M2 bikes ship with the 168W charger, which needs 4 hours and 36 minutes to top off a 600 Wh RS600 battery or 6 hours and 3 minutes for an 800 Wh RS800 pack. Upgrading to the 508W GaN fast charger (standard on M2S bikes like the PX Carbon) cuts an 800 Wh RS800 full charge to 2 hours and 25 minutes. It also fills the FP700 battery from 0 to 80 percent in 76 minutes. For battery longevity habits, follow our e-bike battery charging safety guide.
If I were buying an Avinox-powered e-bike in the US today, I’d pick an M2 build like the Amflow PR Carbon ($4,999) or UE Carbon ($3,499) and put the savings toward spare tires, protective gear, or the 508W fast charger. I’d only stretch to an M2S build if you routinely grind brutal, sustained mountain grades at low cadence and already want the top-shelf suspension fork and brakes bundled with Pro or Tier 1/2 packages.
Frequently Asked Questions
What is the main difference between the Avinox M2 and Avinox M2S motors?
The Avinox M2 delivers 110 Nm continuous and 125 Nm Boost torque with 1,100W global peak output, while the lighter M2S produces 130 Nm continuous and 150 Nm Boost torque with up to 1,500W global peak output.
Are Avinox M2 and M2S motors limited to 750 watts in the US?
Yes. US-market Amflow models ship with firmware limiting peak power to 750 watts and assistance speed to 20 mph to satisfy federal Class 1 and Class 2 electric bicycle regulations.
Why does the Avinox M2S drop from 1,500W to 1,300W on some bikes?
Reaching 1,500 watts globally requires high-discharge cells found in the Avinox FP700 integrated or RS800 packs. When paired with standard FS600, FS800, or third-party OEM batteries, global peak output caps at 1,300 watts.
Which charger comes with Avinox M2 versus M2S e-bikes?
Entry and mid-tier M2 bikes like the Amflow UE and TL ship with the 168W charger, whereas flagship M2S bikes like the Amflow PX Carbon include the 508W GaN fast charger.